Pressure Systems 9022 Uživatelský manuál stáhnout pdf (Strana 109)

www.meas-

spec.com

Measurement Specialties Inc. NetScanner System (9016, 9021, & 9022) User’s Manual

1 - 76

RE-BOOT MODULE (UDP/IP Command ‘psireboot’)

Purpose: To unconditionally “reboot” a specified module.

Command

“psireboot ethadr”

where ethadr is the Ethernet address

of the specified module in the

following special hex-digit format

‘xx-xx-xx-xx-xx-xx’

Response

none (module reboots)

Description: When a module receives this broadcast command, (by continuously monitoring

port 7000) it responds by immediately restarting its firmware. The result is

essentially the same as a power-up restart, in that any TCP/IP connection is lost,

and the module returns to its normal startup state. The host must wait long enough

for the re-boot process to be completed before it can again request a connection to

the module.

Example:

• Re-boot a specified module on the network.

“psireboot 00-E0-8D-00-00-01”

Response:

(None)

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 193 194

Žádné komentáře

Pressure Systems 9022 Uživatelský manuál Strana 109